Most physics questions end with a number on paper, and the student never sees what that number means. In a Gergasi lab you are given the values (each student gets their own), you work out the answer, and then the simulation runs on your number. Get the range of a projectile right and the ball lands in the target. Get it wrong and you see exactly how far off you were, which is often the moment the idea finally makes sense.
Three ways to use a lab
- Calculate first. Work out the answer, then the simulation runs on it. This is the mode that is marked and earns points in class.
- Watch the working. The simulation runs and the working fills in line by line as it happens. Use ‹ Step and Step › to jump to each line. Good for learning a new topic.
- Both. Watch one run with the working, then try a fresh set of values yourself.
Answers are marked by our server with a sensible tolerance, never "exact to the last decimal", because real calculations round. Your first answer is the one that counts.
The labs
Form 1 tasters
- Balance the scale: solve a·x + b = c and the scale does the algebra
- Float or sink: density ρ = m/V and how much of an object stays under water
Form 4 Physics (SPM)
- Linear motion: a braking car, thinking and stopping distance, with v-t and s-t graphs
- Free fall on Earth, the Moon or Mars
- Projectile motion: range, time of flight and maximum height
- Momentum: two trolleys collide, elastic or sticking together
- Force and impulse: how an airbag reduces the force, F = Δp / Δt
- Satellites: orbital speed and period
- Specific heat capacity: heating water, Q = mcΔθ
- Gas laws with a syringe: Boyle's and Charles's laws
- Waves: ripple tank and double slit, v = fλ and fringe spacing
- Refraction and fibre optics: Snell's law and the critical angle
- Lenses: image distance and magnification
Form 5 Physics (SPM)
- Forces on a slope and equilibrium
- Springs: Hooke's law, in series and in parallel
- Archimedes' principle: load a boat and see how low it sits
- Bernoulli's principle: lift on a wing
- Ohm's law: series and parallel circuits
- EMF and internal resistance from two readings
- Transformers: turns ratio and efficiency
- Radioactive decay and half-life
Additional Mathematics (Form 4-5)
- Quadratic functions: the vertex and roots of a fountain's arc
- Rates of change: inflating a balloon, from dV/dt to dr/dt
- Area under a v-t graph by integration
- Vectors: crossing a river, heading, time and drift
Diploma and Degree (engineering)
- Shear force and bending moment in a beam
- Beam deflection
- Trusses by the method of joints
- Pipe flow with losses
- RC and RL circuits: time constant and voltage over time
- Mass-spring-damper: natural frequency and damping ratio
- Heat through a wall: conduction and U-value
- Numerical methods: Euler steps against the exact answer, and a projectile with drag
In a live class
A teacher can push a lab to the whole class. Every student gets their own values, so copying a neighbour's answer doesn't help. The teacher sees a ✓ or ✗ for each student as the answers come in, can open any attempt, and can show one to the class without the student's name to talk through a common mistake. Each right answer earns 5 points towards the class ranking.
Every lab's physics is checked against hand-worked textbook values before it goes live.





